Product ID:ETHYLENE/ACRYLIC ACID COPOLYMER, 062
MSDS Date:10/01/1991
FSC:6810
NIIN:00N041614
MSDS Number: BSWFP

Emergency Phone: 716-265-0413

Info Phone: 716-265-0413

Cage: 0MWG0

Telephone: 716-265-0413

Cage: 0MWG0

ETHYLENE COPOLYMER; (ETHYLENE/ACRYLIC ACID COPOLYMER)

CAS: 9010-77-9

Fraction By Weight: 100%

OSHA PEL 10 PPM (MFR)

ACGIH TLV: 2 PPM (MFR)

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MILD SKIN IRRITANT. NON EYE IRRITANT.
NO OTHER HEALTH EFFECTS ARE KNOWN TO EXIST.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:IN ALL CASES, IF IRRITATION DEVELOPS, SEEK MED ASSIST. INHAL:
REMOVE FROM EXPOSURE. IF BREATHING STOPS, BEGIN MOUTH TO MOUTH.
EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SKIN: WASH AFFECTED
AREA W ITH SOAP & WATER. REMOVE DIRTY CLOTHING. INGEST: CALL MD
IMMEDIATELY.

Flash Point:>275F,>135C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL OR FINE WATER SPRAY.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:MELTS IN PROXIMITY TO FIRES CAUSING
SLIPPERY FLOORS.

Spill Release Procedures:KEEP AWAY FROM HEAT OR FLAME. SWEEP UP WITH A
MINIMUM OF DUST GENERATION. COLLECT IN CONTAINER FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID EXCESSIVE HEAT. DO NOT STORE
NEAR AMINES. STORE IN TIGHTLY CLOSED CONTAINER.
Other Precautions:MATERIAL IS INTENDED FOR LAB USE ONLY. IF IS NOT SOLD
OR INTENDED FOR DRUG, HOUSEHOLD OR OTHER USES.

Respiratory Protection:IF NEEDED. NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN(F PN).
Ventilation:LOCAL EXHAUST.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:GOOD HYGIENE SHOULD BE FOLLOWED.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Melt/Freeze Pt:M.P/F.P Text:>72C
Spec Gravity:0.93-0.97
Solubility in Water:NEGLIGIBLE.
Appearance and Odor:WHITE BEADS, CHARACTERISTIC WAXY ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS & AMINES.
Stability Condition to Avoid:TEMPERATURES OVER 250C. AVOID CONTACT WITH
FLAME.
Hazardous Decomposition Products:CO, CO*2 AND COMBUSTIBLE GASES MAY BE
GENERATED.

Waste Disposal Methods:IN ACCORDANCE WITH STATE, FEDERAL, & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.